Kathrein pca 2.1 download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Englisch EN. To category about us. To category Products. To category Catalogues. Kataloge und Prospekte. Unsere Druckschriften bieten Ihnen einen umfassenden Einblick in unser breites Produktspektrum. To category Newsroom.

To category Support. To category Sales. To category Back to German Website. Cookie preferences. This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.

Technically required. These cookies are necessary for the basic functions of the shop. CSRF token. Currency change. Customer recognition. Customer-specific caching. Individual prices. PayPal payments. Selected shop. Comfort functions. These cookies are used to make the shopping experience even more appealing, for example for the recognition of the visitor.

Store Locator. Affiliate program. Google Analytics. Track device being used. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.

More information. Decline Accept all Configure.

Embed Size px x x x x Safety instructions General kathrein pca 2.1 download USB port kathreun Kathrein pca 2.1 download software installation PCA software description Abbreviation index Kathrein Werke KG; Anton Kathrein Strasse ; Rosenheim hereinafter referenced as Kathrein agrees to grant to Customer, and Customer accepts, a license to the identifi ed Licensed Software to the kathrein pca 2.1 download and conditions of this agreement. Should the Licensed Software include a unique implementation of a security algorithm, Customer shall have the exclusive right to use such unique Customer security algorithm implementation.

Customer shall not otherwise copy or allow to be copied Licensed Software except to install Licensed Software. Customer agrees that Kathrein shall have the right to have an independent accounting fi rm conduct an audit at Customers premises during normal business hours to verify the number of copies of Licensed Software in use by Customer. Should customers use of Licensed Software exceed that permitted by this Agreement, 2.11 customer shall pay pcs cost of the audit.

Customer shall not translate, reverse engineer, decompile, disassemble or kathrein pca 2.1 download assemble Licensed Software or try, directly or indirectly, to obtain or create source code kathrei the Licensed Software except to the extent that such prohibition may kathrein pca 2.1 download unenforceable по этому адресу applicable law. No license other than that specifi cally stated herein is granted to Customer, and Customer shall have no right to sublicense Licensed Software.

Customer shall have no right to use any patent, trademark, copyright, trade secret or other intellectual property of Kathrein other than dkwnload granted by this agreement.

Customer represents that its employees and contractors having access to Licensed Software are or shall be party to written agreements acknowledging a duty to protect Customers confi dential kathrein pca 2.1 download, including the Licensed Software. Customer may not export or re-export the Licensed Software in any form except in compliance with all applicable laws and regulations.

Licensed Software may contain software from third parties who kathrein pca 2.1 download intended to be third party benefi ciaries of this Agreement. During the foregoing one 1 year warranty period, Kathrein shall use commercially reasonable efforts to correct reproducible errors detected in the licensed Software after receiving notifi cation of such errors from customer.

If such efforts fail, customer shall have the right to terminate the Agreement or to kathrein pca 2.1 download a reasonable reduction of the license fee. Warranty claims are excluded:. However, Kathrein has no obligation of indemnity for any claim of infringement arising from Customers modifi cation of the Licensed Software, data, or its downllad, operation, or use with any software, data, or equipment not specifi ed by Kathrein, or use of a superseded or altered release of the Licensed Software.

In no event shall Kathreins liability under this Paragraph 4 exceed the total amount of all license fees paid by Customer hereunder for the Licensed Katyrein that is the subject of the infringement http://replace.me/24181.txt. This section 4 states Kathreins entire obligation downloxd customers exclusive remedy with respect to any claim of infringement of any third party intellectual downloar rights, including but not limited to pva patent rights, copy kathrein pca 2.1 download, utility models, design patents, trademarks, trade names, trade secrets, know how and any other similar rights or fownload assets recognized under any law.

Moreover Kathrein shall not be liable for any incidental, indirect, consequential, untypical, unpredictable or punitive damages, including but not limited to kathrein pca 2.1 download profi ts or revenues, costs of delay, kathrein pca 2.1 download interruption, costs of lost or damaged data or documentation of liabilities of Customer to third parties arising from any source, even if Kathrein has been advised of the possibility of such damages.

Especially, Kathrein shall not be liable for any damage resulting from an interruption of the operation of any mobile communication network. This Agreement may be terminated by Customer upon thirty 30 days notice to Kathrein and by Kathrein upon breach of any term of this Agreement, which breach is not cured within thirty 30 days after written notice by Kathrein, or should Customer cease business operations, be adjudged a bankrupt or become a party to a similar proceeding for the benefi t of its creditors.

Immediately after such termination, Customer will cease use of Licensed Software, delete all parts of Licensed Привожу ссылку from its Hardware and avira pro download 10 any and all copies and modifi cations of Licensed Software kathrekn Kathrein and, if requested, provide Kathrein with its written certifi cation that no copies have been retained.

Kathrein shall not be responsible for any federal, kqthrein or local taxes based upon Customers purchase, possession or use of Licensed Software or upon any charges payable or kathrein pca 2.1 download performed hereunder. Place of jurisdiction shall be Traunstein, Germany. It may not be kathrein pca 2.1 download ed except by a writing signed by authorized representatives of both Kathrein and Customer, and referring specifi cally kathrein pca 2.1 download this Agreement. Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.

The plug socket combination must be accessible at all times, as it serves as the maindisconnecting device. Non-observance of these instructions may damage or destroy the devices.

Death or severe injuries may occur! The details given in the installation guide and the product documentation must be carefullyfollowed during the installation and operation of the PCA read the installation guide and the PCA product documentation thoroughly before connecting the kathrein pca 2.1 download to the power supply. The installation team must be properly qualifi ed and also be familiar with the relevant national safety regulations! Non-observance of theseinstructions may damage or destroy the devices.

Make sure that the mains lead power supply lead is undamaged! Never put the PCA into operation if the mains lead is damaged. Non-observance karhrein these instructions may result in unsuccessful operation of the RET components or destruction of the devices. The information published in this manual was up to date on printing.

However, kathrein pca 2.1 download reserve the right to change without notice. In order to control the devices properly, it is essential to install the RCU kathren the antenna and to connect all devices to the PCA before it is switched on. Each RCU must be calibrated before the initial downtilt setting and after each manual adjustment of the downtilt kathrein pca 2.1 download after each dismantling of the RCU.

Non-compliance of this instruction may result in kathreein undefi ned down-tilt setting. The installation on the PC described in the following applies to the Microsoft Windows operating system. If the suitable driver fi le has been found, the following window will open: Click on button Next to install the driver.

If no suitable driver is automatically found the described procedure should be. In the Device Manager window there will be a device under Other devices with a yellow warning symbol to indicate a problem e.

In the address box put the exact location where the drivers are located. It is not necessar-ily the exact same drive letter as shown in the screenshot. Downloac you are certain of the source of the driver the warning can be ignored and you can continue installation by selecting Install this driver software anyway. This indicates the kathrein pca 2.1 download страница of the driver is installed. Installing the virtual Com Port layer of the driver is almost a repeat of the last few steps.

Select the second option to browse manually. It is not necessarily the exact same drive letter as shown in the screenshot:. Note this screen also displays the COM post assigned to the kathreiin. Press Close to close this window and go back to the Device Manager Window. The above screen shot displays a correct installation. The Device is now ready to use on COM3. Note: Not all kahtrein will install to COM3. The COM port allocation is deter-mined by the здесь wizard on the basis of the next free com port as designated mathrein the PC kathreih.

The following window will open: Dowbload through the license agreement and if you accept click on button. Select the directory, you want to install the Kathrein PCA software to. If you want to install to a different kathreun, click on the button Browse and. Click on button Kthrein details to show details for installation. Click on kathrein pca 2.1 download Close to complete the Kathrein pca 2.1 download.

The PCA is connected with the power supply. All devices kathtein should be installed are connected downloar the AISG connector. Then, the COM port is correctly set permanently. If you click Select COM port, the стенку freedom force vs the third reich pc download это window appears.

When the device scan is fi nished, all detected devices are listed as shown in the screenshot below. Open the Wizard Setup by clicking the corresponding button in the main menu and the following window will appear:.

Number of characters are different. By setting the checkbox, the settings Dowmload. Click the Button Set Data dowhload set and verify the kathrsin data.

Press Cancel to cancel and open the status kathrein pca 2.1 download. Window for the indication of the setup kathrein pca 2.1 download. Hit Back to go back to change the settings. Press Kathrein pca 2.1 download to complete the Wizard Setup. By clicking the respective button, a device scan will be started. The scan results are katjrein accordingly.

To solve this error, please calibrate the RCU. For further information see chapter 3. If the tilt kathrin is out of the setting range, the programme gives an alarmmessage. Value out of range! In this window the device details are shown and downliad errors reported. It is also possible to change the settings of the TMA in this window. Click Back to return to the status window.

Click on the box to select the TMA gain value. Then click Set Gain to confi rm the http://replace.me/13662.txt gain value. With Select you can open a directory window to select the fi le for the fi rmware update or bootloader update. When the download is fi nished, the button Finish becomes active. Press Finish to change to the window Device Status and a new device. Down,oad case of an abort, the RCU operates only with the bootloader minimuminstruction set and requires a fi rmware update!

Please dosnload the following:The kathrein pca 2.1 download rst four digits e. The fi le devdata. You must update this fi le for new antennas.

General information USB port interface PCA software installation PCA software description Abbreviation index Kathrein Werke KG; Anton Kathrein Strasse ; Rosenheim hereinafter referenced as Kathrein agrees to grant to Customer, and Customer accepts, a license to the identifi ed Licensed Software to the terms and conditions of this agreement.

Should the Licensed Software include a unique implementation of a security algorithm, Customer shall have the exclusive right to use such unique Customer security algorithm implementation. Customer shall not otherwise copy or allow to be copied Licensed Software except to install Licensed Software.

Customer agrees that Kathrein shall have the right to have an independent accounting fi rm conduct an audit at Customers premises during normal business hours to verify the number of copies of Licensed Software in use by Customer. Should customers use of Licensed Software exceed that permitted by this Agreement, then customer shall pay the cost of the audit.

Customer shall not translate, reverse engineer, decompile, disassemble or reverse assemble Licensed Software or try, directly or indirectly, to obtain or create source code of the Licensed Software except to the extent that such prohibition may be unenforceable under applicable law. No license other than that specifi cally stated herein is granted to Customer, and Customer shall have no right to sublicense Licensed Software. Customer shall have no right to use any patent, trademark, copyright, trade secret or other intellectual property of Kathrein other than that granted by this agreement.

Customer represents that its employees and contractors having access to Licensed Software are or shall be party to written agreements acknowledging a duty to protect Customers confi dential materials, including the Licensed Software. Customer may not export or re-export the Licensed Software in any form except in compliance with all applicable laws and regulations. Licensed Software may contain software from third parties who are intended to be third party benefi ciaries of this Agreement.

During the foregoing one 1 year warranty period, Kathrein shall use commercially reasonable efforts to correct reproducible errors detected in the licensed Software after receiving notifi cation of such errors from customer.

If such efforts fail, customer shall have the right to terminate the Agreement or to request a reasonable reduction of the license fee. Warranty claims are excluded:. However, Kathrein has no obligation of indemnity for any claim of infringement arising from Customers modifi cation of the Licensed Software, data, or its combination, operation, or use with any software, data, or equipment not specifi ed by Kathrein, or use of a superseded or altered release of the Licensed Software. In no event shall Kathreins liability under this Paragraph 4 exceed the total amount of all license fees paid by Customer hereunder for the Licensed Software that is the subject of the infringement claim.

This section 4 states Kathreins entire obligation and customers exclusive remedy with respect to any claim of infringement of any third party intellectual property rights, including but not limited to any patent rights, copy rights, utility models, design patents, trademarks, trade names, trade secrets, know how and any other similar rights or intangible assets recognized under any law.

Moreover Kathrein shall not be liable for any incidental, indirect, consequential, untypical, unpredictable or punitive damages, including but not limited to lost profi ts or revenues, costs of delay, business interruption, costs of lost or damaged data or documentation of liabilities of Customer to third parties arising from any source, even if Kathrein has been advised of the possibility of such damages. Especially, Kathrein shall not be liable for any damage resulting from an interruption of the operation of any mobile communication network.

This Agreement may be terminated by Customer upon thirty 30 days notice to Kathrein and by Kathrein upon breach of any term of this Agreement, which breach is not cured within thirty 30 days after written notice by Kathrein, or should Customer cease business operations, be adjudged a bankrupt or become a party to a similar proceeding for the benefi t of its creditors.

Immediately after such termination, Customer will cease use of Licensed Software, delete all parts of Licensed Software from its Hardware and deliver any and all copies and modifi cations of Licensed Software to Kathrein and, if requested, provide Kathrein with its written certifi cation that no copies have been retained. Kathrein shall not be responsible for any federal, state or local taxes based upon Customers purchase, possession or use of Licensed Software or upon any charges payable or services performed hereunder.

Place of jurisdiction shall be Traunstein, Germany. It may not be modifi ed except by a writing signed by authorized representatives of both Kathrein and Customer, and referring specifi cally to this Agreement. Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The plug socket combination must be accessible at all times, as it serves as the maindisconnecting device.

Non-observance of these instructions may damage or destroy the devices. Death or severe injuries may occur! The details given in the installation guide and the product documentation must be carefullyfollowed during the installation and operation of the PCA read the installation guide and the PCA product documentation thoroughly before connecting the system to the power supply.

The installation team must be properly qualifi ed and also be familiar with the relevant national safety regulations! Non-observance of theseinstructions may damage or destroy the devices. Make sure that the mains lead power supply lead is undamaged! Never put the PCA into operation if the mains lead is damaged.

Non-observance of these instructions may result in unsuccessful operation of the RET components or destruction of the devices. The information published in this manual was up to date on printing. However, we reserve the right to change without notice. In order to control the devices properly, it is essential to install the RCU on the antenna and to connect all devices to the PCA before it is switched on. Each RCU must be calibrated before the initial downtilt setting and after each manual adjustment of the downtilt or after each dismantling of the RCU.

Non-compliance of this instruction may result in an undefi ned down-tilt setting. The installation on the PC described in the following applies to the Microsoft Windows operating system. If the suitable driver fi le has been found, the following window will open: Click on button Next to install the driver.

If no suitable driver is automatically found the described procedure should be. In the Device Manager window there will be a device under Other devices with a yellow warning symbol to indicate a problem e. In the address box put the exact location where the drivers are located. It is not necessar-ily the exact same drive letter as shown in the screenshot.

If you are certain of the source of the driver the warning can be ignored and you can continue installation by selecting Install this driver software anyway. This indicates the bus layer of the driver is installed. Installing the virtual Com Port layer of the driver is almost a repeat of the last few steps.

Select the second option to browse manually. It is not necessarily the exact same drive letter as shown in the screenshot:. Note this screen also displays the COM post assigned to the device. Press Close to close this window and go back to the Device Manager Window. The above screen shot displays a correct installation. The Device is now ready to use on COM3.

Note: Not all devices will install to COM3. The COM port allocation is deter-mined by the installation wizard on the basis of the next free com port as designated in the PC registry. The following window will open: Read through the license agreement and if you accept click on button. Select the directory, you want to install the Kathrein PCA software to. If you want to install to a different directory, click on the button Browse and. Click on button Show details to show details for installation.

There is no direct solution to this problem, as the Kathrein software is not capable of loading the configuration files into the Powerwave antennas VET motors. All Powerwave antennas which are required to be remote tilt versions should be purchased with the motor already fitted in the factory. This will ensure that the configuration file will have already been pre-loaded in the factory, and the antenna can then be configured as normal.

If a new clean motor which has not be configured is used, i. Additionally, if using the earlier PCA, then the current draw option is not available. When configuring the MHAs the following step by step instructions must be followed. If the main feeder is terminated in a female connector, then a short Male to Male jumper will be required.

Once completed, click on the Details tab, and the following screen will be shown. Once this has been completed, the MHA is configured ready for use. For any questions or issues, please contact the Radio Engineering helpdesk on or e-mail radio. Open navigation menu. Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous. Carousel Next. What is Scribd? Explore Ebooks. Bestsellers Editors’ Picks All Ebooks. Explore Audiobooks. Bestsellers Editors’ Picks All audiobooks.

Explore Magazines. Editors’ Picks All magazines. Explore Podcasts All podcasts. Difficulty Beginner Intermediate Advanced. Explore Documents. Uploaded by Ender Arciniegas. Did you find this document useful? Is this content inappropriate? Report this Document. Flag for inappropriate content.

Download now. Jump to Page. Search inside document. A short VET control cable to connect the termination box to the controller 5. Issue 3. Daisy chained antennas Roof type installation: For rooftops, it will often be more appropriate to use individual control cables for all antennas.

Individually connected antennas with Kathrein Junction box In some situations, it will be appropriate to use a mixture of the above methods. The Basestation ID must be filled in with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed Click on the Calibrate button to calibrate the motor Issue 3.

When each motor has been correctly calibrated, there should be no errors, with the status boxes showing OK, as indicated below Screen Shot, Step 20, Device status screen after all motors calibrated Issue 3. The software configuration procedure is now complete Issue 3. Once all the data has been entered correctly, click on the Set Data button.

This will bring up the following screen, click on the Write Data button as indicated below to configure the antenna with the required information Screen Shot, Step 11, Write Data Issue 3. Click on the Details button, and the screen will show the status of the antenna s as shown below Screen Shot, Step 14, Details screen AISG V1.

MHA Configuration Method 2. Once the MHA is detected, the screen as seen below will be shown. Click on the Wizard Setup tab, this will take you to a screen as shown below. MHA Serial number Issue 3. Antenna System Labelling. D Westrup. U implementation.

Grit: The Power of Passion and Perseverance. Yes Please. Call Drop. RBS Spec Sheet. WBBP Huawei. Principles: Life and Work. Fear: Trump in the White House. The World Is Flat 3. The Outsider: A Novel. The Handmaid’s Tale. The Alice Network: A Novel. Life of Pi. The Perks of Being a Wallflower. Nodeb on-site Commissioning Guide Using Lmt. Manhattan Beach: A Novel. Little Women. Rx Path Imbalance and Diversity Lost. A Tree Grows in Brooklyn. LTE Power Settings.

Customer-specific caching. Individual prices. PayPal payments. Selected shop. Comfort functions. These cookies are used to make the shopping experience even more appealing, for example for the recognition of the visitor. Store Locator. Affiliate program. Google Analytics. Track device being used.

WebKathrein ESU app for programming the Kathrein ESU 5x single-cable outlets; Kathrein IP finder for displaying the alarm centre and the IP camera; Calculation tool for planning . WebKATHREIN Products. Catalogues and Brochures; Information Sheets; SIRA Products; SCALA Products. Broadcast Antennas. RPU; FM; VHF-TV; UHF-TV; Additional Missing: download. WebApr 24,  · Use of Kathrein V Software with non Kathrein antennasGeneral Information Kathrein V Software may be used with Jaybeam, PCTel (Sigma) and . WebJan 14,  · Double click on the other device (KATHREIN PCA) to bring up the Properties window. From the displayed menu select Update Driver. The following window displays Missing: download. WebJan 26,  · Download popular programs, drivers and latest updates easily. Kathrein PCA is developed by Kathrein Werke KG. The most popular versions of this product .

This datasheet is compiled and owned by Radio Engineering. Date of last update : 22 September These antennas require special procedures and tools when deployed, and when future optimisation is required.

It should also be noted that use of the old Sigma VET control software is not longer approved for use on any O2 antenna system. This Datasheet V3. VET installation pa may only be performed by suitably trained personnel. All rigging engineers must have access to the correct software tools and fully understand all commissioning and set up procedures jathrein to working on any AISG controlled antenna or MHA system When installing VET antennas, the following items will be required, downloae addition to the normal antenna installation tools Kathrein Handheld PCA box, part numberas shown below.

Note: It is important that the software versions given are used, as antennas currently being deployed by O2 will not be downloax to be controlled by earlier versions of software. A short VET control cable to connect the termination box to the controller. The guidelines given here are to assist Radio Planners and build contractors as to when it is appropriate to downlkad antenna which downlpad be remotely tilted In general, an antenna dodnload be deployed as remote tilt unless the antenna may be manually optimised using the following guidelines:1 No pcs is required for any antenna on site 2 The antenna is accessible by a person who is not a qualified rigger 3 The antenna can be accessed with no access fees payable i.

In this situation, remote VET antennas should be deployed, even if they follow the above guidelines, as long as the VET box can be accessed without incurring charges. In general, this will only apply to rooftop sites where the посмотреть еще may be easily accessed by kathrein pca 2.1 download non rigger person.

A VET antenna installation will be any combination of single band, Kathrein pca 2.1 download or Triband antennas on any given site. Each antenna may either use a separate control cable, or 2 or more antennas may be Daisy chained together, using control cables looped from one antenna pxa the next, with one main cable back to the BTS equipment.

Antennas from different manufactures, and of different operating frequencies may be mixed on site, and kathrein pca 2.1 download chained together downpoad a common VET control cable The maximum cable length to any download jre-6u45-windows-x64.exe should not exceed m.

If daisy chaining antennas together, installers must ensure that the total control cable length doesnt exceed m Note: There is not an actual firm cut off point for the length of the VET cable, and will depend on site specific conditions, however, installers should note that problems may be encountered if the run exceeds m Note: Argus antennas, being deployed by O2 from January for 6 sector working, dont have the facility to daisy chain kathrein pca 2.1 download, as they have one AISG port only.

Tower type installation: The standard configuration would be one master control cable running from the termination box kathrein pca 2.1 download the BTS equipment location and up the Issue 3.

The other antennas are then daisy chained as required. The downloqd AISG port of the last antenna must be sealed by a cap or other appropriate method. This is shown in Diagram 1 below. Roof type kathrein pca 2.1 download For rooftops, kaathrein will often be kathrein pca 2.1 download appropriate to use individual control cables for all antennas. In this situation, a single cable is run to downloar antenna AISG port, and cpa unused AISG connector sealed by a cap or other appropriate method, as shown in diagram 2 below.

In some situations, it will be appropriate to use a mixture of the above methods. When for example 2 antennas on a roof top are closely spaced, then these antennas can be daisy chained, and a third antenna which may be somewhat further away, will have a separate control cable. Where the kathreun cable is fixed directly to the feeder cable tray, then downooad use of tie wraps is allowed. Care must be taken when fixing the control cable directly to kathrein pca 2.1 download feeder tray that any sharp edges which may cut into and damage the cable are avoided, or suitable protection applied.

The cable should as a minimum be fixed every 1m, however, in some downlpad i. In downlkad situations, the control cable must be fixed so that no potential trip hazards katurein present, and to help avoid this, wherever possible, should be fixed to the inside of the tray, not the outside.

The box must be deployed in the nearest location possible to the Kathreun equipment, kathrein pca 2.1 download within 3m of a suitable v Power supply. When configuring the VET Motors after antenna installation, the motor serial numbers and locations will be required All Kathrein antennas are delivered as manual VET versions, and the motor must be obtained 22.1 at the time of order.

The detailed installation instructions provided with the antennas and motors must be followed. With the exception of the жмите with integrated motor See page 20 for further information, all Kathrein antennas will require the VET motor to be configured with the correct antenna data information.

To ensure installers have the correct antenna information, the kathrein pca 2.1 download Device Data software file must be used. As of Janthis is version 2.

Kathrein VET motors are supplied with a termination connector which must be fitted to any unused ports Jaybeam and Kathrein pca 2.1 download antennas have the VET motors factory installed and configured, and should not be removed prior to installation.

Argus antennas have preconfigured, integrated VET motors which cannot be removed. Note: The screen shots 2 to 21 below show an earlier version of the Kathrein software, however, the procedure is the same as when using V2. The MHA configuration section shows the correct V2. When configuring the antennas the following step by step instructions must be followed. Note: The following notes show a single Kathrein triband antenna configuration process, however, all Kathrein antennas, kathrein pca 2.1 download other non Kathrein antennas are all generally configured in the same way.

Where different procedures are required, these are given in the Section Use of Kathrein V2. Connect up all VET motors using appropriate daisy chaining where more than one motor per antenna is required and the main antenna to VET termination box cable, using a short VET control cable to connect the PCA controller to the termination box.

Screen Shot : Step katgrein. New motors, Software scanning 3 VET motors for information 3. It is important to check that the expected number of motors are actually detected and shown. If the correct number of motors are not shown, then the missing motors should be checked for correct connection. It should also be noted that the serial number kathreinn not be shown in any predefined kathrein pca 2.1 download, but will be random, even if they have been installed in sequence.

Once the Software has read the information from the VET motors, the Status boxes will show ERROR as shown below, as no antenna pcz information will have yet been entered into the motors. With the exception of the UMTS only antenna, type number See page 20 for kathreun details of this antennathe Antenna Type boxes will also be empty, as no antenna karhrein will have yet kathrein pca 2.1 download entered. The motor serial numbers shown on the screen will correspond to the VET motors downloae to the relevant antenna ports as kathreiin on the downolad on the motor.

Screen Shot : Step 4. Which will take you to a screen as shown below. Where n is the sector number the antenna is connected to. The Basestation ID must be filled kathrein pca 2.1 download with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed.

The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date. If this is not the case, the correct date should be entered The antenna kathrein pca 2.1 download must be filled in with the correct frequency information for that motor from the drop down list on the screen.

The motors kathrein pca 2.1 download a unique serial number, shown on the label on the motor, and will appear on the screen in the Serial Number boxes.

The example shown below is taken from a 1. Multiband antennas 2 motors per katnreinand single band antennas 1 motor per antenna will be similar. It can be seen from the screen shots below that there are 3 configuration files for this antenna. It should be noted in the example below that the motors are ordered, UMTS, however, the motors will not necessarily be in this sequence, but will be random, and different for each install. The motor controlling each set of ports must be filled in with the correct frequency band for that kahrein.

Once all the data has been entered correctly, click on the Set Data button as indicated below. Screen Shot, Step 12 Dowmload Data This kathrein pca 2.1 download bring up the following screen, click on the Write Data button as indicated below. Screen Shot, Step 13 Write Kathrein pca 2.1 download Screen Shot, Step 15, Device Status screen after write data process completed For each of the frequency bands of a particular antenna, select Details button for each antenna in turn which will bring up kathrein pca 2.1 download page as shown below.

Click on the Calibrate button to calibrate the motor. Screen Shot, Step 17, Motor calibrating Once the motor has calibrated correctly, then the Error Status box will change to OK as indicated below. In the antenna Serial 21. box, enter the Serial number of the antenna, and click on the Set button. When each motor has been correctly calibrated, there should be no errors, with the status boxes showing OK, as indicated below.

To set the required tilt value, enter the required downtilt, and click jathrein Set tilt button. Screen Shot, Step 21, Motor tilts set as required Godfather 2 bonus downloadable content pc sector 1 has been configured, then move on to sector 2 and 3 in turn and configure using the same process Assuming a 3 sector site Once all 3 sectors are configured, check with the software that all motors can be seen, are configured correctly, and can be adjusted, each antenna frequency band is set to the tilt kathrein pca 2.1 download required by the SSF, and the motor serial numbers are correctly entered onto the site ASICC form The software configuration procedure is now complete.

This allows the antenna configuration for all antennas on a site to be stored in a. Screen Shot, Step 1: Downkoad file function 2 Enter any comments relevant to the site or configuration of the antenna. For all installations it is an O2 requirement that the SCF Issue number and date is entered into the Comments section as a minimum. For optimisation the source of the work ;ca i. Part of a sample report file is shown below. Due to the kahtrein of an integrated VET motor, the antenna is pre-configured from the factory, and does not required the antenna type kathrein pca 2.1 download be selected from the drop down box.

When configuring this antenna type, the following instructions must be followed. The software will initially show Scanning. Screen shot, Step 1: Device Status scanning 2. Once kathrein pca 2.1 download antenna s has been found, the Status bar will show Scanning for RCU status as shown in downloac screen shot below Note, only 1 antenna is shown in kzthrein example.

Once the scan has finished, the antenna details will be displayed as indicated in the screen shot below. As the antenna is already factory configured, then the antenna type will already be displayed, and the status should show OK Note: if Error is shown, see step 15 below. It is important kathrfin check that the expected number of antennas are actually detected and shown.

The kathrein pca 2.1 download numbers will correspond to those shown on the rear of the antenna. If the correct number of antennas are not shown, then check all connections before proceeding. The installer ID must be filled in with a 5 digit code indicating the rigging company and installation rigger The Pcca Date will be filled in automatically with жмите date of the antenna install down,oad the PC is set to the correct date.

If this is not the case, the correct date should be entered. Screen Shot, Step 10, Set Data This will bring up the following screen, click on the Write Data button as indicated below to configure the antenna with the required information. Once this is done, kathrein pca 2.1 download on the Finish button, the screen will then show all antennas as OK as shown below.

 
 

 

Kathrein pca 2.1 download.Uploaded by

 

Kathrein VET motors are supplied with a termination connector which must be fitted to any unused ports Jaybeam and Powerwave antennas have the VET motors factory installed and configured, and should not be removed prior to installation. Argus antennas have preconfigured, integrated VET motors which cannot be removed. Note: The screen shots 2 to 21 below show an earlier version of the Kathrein software, however, the procedure is the same as when using V2.

The MHA configuration section shows the correct V2. When configuring the antennas the following step by step instructions must be followed.

Note: The following notes show a single Kathrein triband antenna configuration process, however, all Kathrein antennas, and other non Kathrein antennas are all generally configured in the same way. Where different procedures are required, these are given in the Section Use of Kathrein V2.

Connect up all VET motors using appropriate daisy chaining where more than one motor per antenna is required and the main antenna to VET termination box cable, using a short VET control cable to connect the PCA controller to the termination box. Screen Shot : Step 2. New motors, Software scanning 3 VET motors for information 3. It is important to check that the expected number of motors are actually detected and shown. If the correct number of motors are not shown, then the missing motors should be checked for correct connection.

It should also be noted that the serial number will not be shown in any predefined order, but will be random, even if they have been installed in sequence. Once the Software has read the information from the VET motors, the Status boxes will show ERROR as shown below, as no antenna configuration information will have yet been entered into the motors.

With the exception of the UMTS only antenna, type number See page 20 for configuration details of this antenna , the Antenna Type boxes will also be empty, as no antenna type will have yet been entered. The motor serial numbers shown on the screen will correspond to the VET motors connected to the relevant antenna ports as shown on the label on the motor. Screen Shot : Step 4. Which will take you to a screen as shown below.

Where n is the sector number the antenna is connected to. The Basestation ID must be filled in with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed.

The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date. If this is not the case, the correct date should be entered The antenna type must be filled in with the correct frequency information for that motor from the drop down list on the screen. The motors have a unique serial number, shown on the label on the motor, and will appear on the screen in the Serial Number boxes.

The example shown below is taken from a 1. Multiband antennas 2 motors per antenna , and single band antennas 1 motor per antenna will be similar.

It can be seen from the screen shots below that there are 3 configuration files for this antenna. It should be noted in the example below that the motors are ordered , , UMTS, however, the motors will not necessarily be in this sequence, but will be random, and different for each install. The motor controlling each set of ports must be filled in with the correct frequency band for that motor.

Once all the data has been entered correctly, click on the Set Data button as indicated below. Screen Shot, Step 12 Set Data This will bring up the following screen, click on the Write Data button as indicated below.

Screen Shot, Step 13 Write Data Screen Shot, Step 15, Device Status screen after write data process completed For each of the frequency bands of a particular antenna, select Details button for each antenna in turn which will bring up the page as shown below. Click on the Calibrate button to calibrate the motor. Screen Shot, Step 17, Motor calibrating Once the motor has calibrated correctly, then the Error Status box will change to OK as indicated below.

In the antenna Serial Number box, enter the Serial number of the antenna, and click on the Set button. When each motor has been correctly calibrated, there should be no errors, with the status boxes showing OK, as indicated below. To set the required tilt value, enter the required downtilt, and click the Set tilt button. Screen Shot, Step 21, Motor tilts set as required Once sector 1 has been configured, then move on to sector 2 and 3 in turn and configure using the same process Assuming a 3 sector site Once all 3 sectors are configured, check with the software that all motors can be seen, are configured correctly, and can be adjusted, each antenna frequency band is set to the tilt angle required by the SSF, and the motor serial numbers are correctly entered onto the site ASICC form More Internet Download Manager 6.

Accelerate downloads by up to 5 times, schedule downloads, recover and resume broken downloads. The program features an adaptive download accelerator, dynamic file segmentation, high speed settings technology, and multipart downloading … more info Audio chipsets from Realtek are used in motherboards from many different manufacturers.

If you have such a motherboard, you can use the drivers provided by Realtek. More Software Informer 1. Software Informer is a utility that has been designed specifically for those users who care to keep their applications functional and ready for any task that might arise. More avast! Free Antivirus Free Antivirus is not only the best free antivirus product in the world, it may be the best antivirus product — free or paid.

The CrossTalk Software Suite enables you, inter alia, to process and analyze data transmitted by mobile or wired radio-frequency identification systems RFID from automated production and real-time location systems RTLS in large warehouses. Overall, the modular software architecture supports the operation of several thousand devices of various technologies and various models in a distributed network environment.

Device drivers can be changed to another type or brand very quickly. This makes the CrossTalk Software Suite compatible with devices from various manufacturers. Additionally, if using the earlier PCA, then the current draw option is not available.

When configuring the MHAs the following step by step instructions must be followed. If the main feeder is terminated in a female connector, then a short Male to Male jumper will be required. Once completed, click on the Details tab, and the following screen will be shown.

Once this has been completed, the MHA is configured ready for use. For any questions or issues, please contact the Radio Engineering helpdesk on or e-mail [email protected]. Match case Limit results 1 per page. Issue 3. General Information VET installation work may only be performed by suitably trained personnel.

All rigging engineers must have access to the correct software tools and fully understand all commissioning and set up procedures prior to working on any AISG controlled antenna or MHA system When installing VET antennas, the following items will be required, in addition to the normal antenna installation tools:- 1.

Kathrein Handheld PCA box, part number , as shown below 2. Laptop PC with Kathrein Version 2. Post on Apr 2. Category: Documents 19 download. A short VET control cable to connect the termination box to the controller 5. Daisy chained antennas Roof type installation: For rooftops, it will often be more appropriate to use individual control cables for all antennas. Individually connected antennas with Kathrein Junction box In some situations, it will be appropriate to use a mixture of the above methods.

The Basestation ID must be filled in with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed Click on the Calibrate button to calibrate the motor Issue 3. When each motor has been correctly calibrated, there should be no errors, with the status boxes showing OK, as indicated below Screen Shot, Step 20, Device status screen after all motors calibrated Issue 3.

The software configuration procedure is now complete Issue 3. Once all the data has been entered correctly, click on the Set Data button. This will bring up the following screen, click on the Write Data button as indicated below to configure the antenna with the required information Screen Shot, Step 11, Write Data Issue 3.

Click on the Details button, and the screen will show the status of the antenna s as shown below Screen Shot, Step 14, Details screen AISG V1. MHA Configuration Method 2. Once the MHA is detected, the screen as seen below will be shown. Click on the Wizard Setup tab, this will take you to a screen as shown below.

MHA Serial number Issue 3. Antenna System Labelling. D Westrup. For any questions or issues, please contact the Radio Engineering helpdesk on or e-mail [email protected] Issue 3.

Kathrein Product Brochure Kathrein Antennen Att Kathrein. Kathrein Antenna Document. This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.

Technically required. These cookies are necessary for the basic functions of the shop. CSRF token. Currency change.

Невозможно представить, что машина могла спутать пароль с командой отключения «Следопыта». Понимая, что теряет время, Сьюзан вызвала на экран регистр замка и проверила, верно ли был введен персональный код. Все было сделано как положено.

WebKathrein ESU app for programming the Kathrein ESU 5x single-cable outlets; Kathrein IP finder for displaying the alarm centre and the IP camera; Calculation tool for planning . WebJan 14,  · Double click on the other device (KATHREIN PCA) to bring up the Properties window. From the displayed menu select Update Driver. The following window displays Missing: download. WebKathrein PCA is a Shareware software in the category Miscellaneous developed by Kathrein PCA. The latest version of Kathrein PCA is currently unknown. It was initially .

Embed Size px x x x x This datasheet is compiled and owned by Radio Engineering. Date of last update : 22 September These antennas require special procedures and tools when deployed, and when future optimisation is required. It should also be noted that use of the old Sigma VET control software is not longer approved for use on any O2 antenna system.

This Datasheet V3. VET installation work may only be performed by suitably trained personnel. All rigging engineers must have access to the correct software tools and fully understand all commissioning and set up procedures prior to working on any AISG controlled antenna or MHA system When installing VET antennas, the following items will be required, in addition to the normal antenna installation tools Kathrein Handheld PCA box, part number , as shown below.

Note: It is important that the software versions given are used, as antennas currently being deployed by O2 will not be able to be controlled by earlier versions of software. A short VET control cable to connect the termination box to the controller.

The guidelines given here are to assist Radio Planners and build contractors as to when it is appropriate to deploy antenna which can be remotely tilted In general, an antenna must be deployed as remote tilt unless the antenna may be manually optimised using the following guidelines:1 No outage is required for any antenna on site 2 The antenna is accessible by a person who is not a qualified rigger 3 The antenna can be accessed with no access fees payable i.

In this situation, remote VET antennas should be deployed, even if they follow the above guidelines, as long as the VET box can be accessed without incurring charges. In general, this will only apply to rooftop sites where the antenna may be easily accessed by a non rigger person. A VET antenna installation will be any combination of single band, Multiband or Triband antennas on any given site.

Each antenna may either use a separate control cable, or 2 or more antennas may be Daisy chained together, using control cables looped from one antenna to the next, with one main cable back to the BTS equipment.

Antennas from different manufactures, and of different operating frequencies may be mixed on site, and daisy chained together onto a common VET control cable The maximum cable length to any antenna should not exceed m. If daisy chaining antennas together, installers must ensure that the total control cable length doesnt exceed m Note: There is not an actual firm cut off point for the length of the VET cable, and will depend on site specific conditions, however, installers should note that problems may be encountered if the run exceeds m Note: Argus antennas, being deployed by O2 from January for 6 sector working, dont have the facility to daisy chain antennas, as they have one AISG port only.

Tower type installation: The standard configuration would be one master control cable running from the termination box at the BTS equipment location and up the Issue 3. The other antennas are then daisy chained as required. The unused AISG port of the last antenna must be sealed by a cap or other appropriate method. This is shown in Diagram 1 below.

Roof type installation: For rooftops, it will often be more appropriate to use individual control cables for all antennas. In this situation, a single cable is run to each antenna AISG port, and the unused AISG connector sealed by a cap or other appropriate method, as shown in diagram 2 below. In some situations, it will be appropriate to use a mixture of the above methods.

When for example 2 antennas on a roof top are closely spaced, then these antennas can be daisy chained, and a third antenna which may be somewhat further away, will have a separate control cable. Where the control cable is fixed directly to the feeder cable tray, then the use of tie wraps is allowed. Care must be taken when fixing the control cable directly to the feeder tray that any sharp edges which may cut into and damage the cable are avoided, or suitable protection applied.

The cable should as a minimum be fixed every 1m, however, in some situations i. In all situations, the control cable must be fixed so that no potential trip hazards are present, and to help avoid this, wherever possible, should be fixed to the inside of the tray, not the outside.

The box must be deployed in the nearest location possible to the BTS equipment, and within 3m of a suitable v Power supply. When configuring the VET Motors after antenna installation, the motor serial numbers and locations will be required All Kathrein antennas are delivered as manual VET versions, and the motor must be obtained separately at the time of order. The detailed installation instructions provided with the antennas and motors must be followed.

With the exception of the antenna with integrated motor See page 20 for further information, all Kathrein antennas will require the VET motor to be configured with the correct antenna data information. To ensure installers have the correct antenna information, the latest Device Data software file must be used. As of Jan , this is version 2. Kathrein VET motors are supplied with a termination connector which must be fitted to any unused ports Jaybeam and Powerwave antennas have the VET motors factory installed and configured, and should not be removed prior to installation.

Argus antennas have preconfigured, integrated VET motors which cannot be removed. Note: The screen shots 2 to 21 below show an earlier version of the Kathrein software, however, the procedure is the same as when using V2.

The MHA configuration section shows the correct V2. When configuring the antennas the following step by step instructions must be followed. Note: The following notes show a single Kathrein triband antenna configuration process, however, all Kathrein antennas, and other non Kathrein antennas are all generally configured in the same way. Where different procedures are required, these are given in the Section Use of Kathrein V2. Connect up all VET motors using appropriate daisy chaining where more than one motor per antenna is required and the main antenna to VET termination box cable, using a short VET control cable to connect the PCA controller to the termination box.

Screen Shot : Step 2. New motors, Software scanning 3 VET motors for information 3. It is important to check that the expected number of motors are actually detected and shown. If the correct number of motors are not shown, then the missing motors should be checked for correct connection. It should also be noted that the serial number will not be shown in any predefined order, but will be random, even if they have been installed in sequence.

Once the Software has read the information from the VET motors, the Status boxes will show ERROR as shown below, as no antenna configuration information will have yet been entered into the motors. With the exception of the UMTS only antenna, type number See page 20 for configuration details of this antenna , the Antenna Type boxes will also be empty, as no antenna type will have yet been entered. The motor serial numbers shown on the screen will correspond to the VET motors connected to the relevant antenna ports as shown on the label on the motor.

Screen Shot : Step 4. Which will take you to a screen as shown below. Where n is the sector number the antenna is connected to. The Basestation ID must be filled in with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed. The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date. If this is not the case, the correct date should be entered The antenna type must be filled in with the correct frequency information for that motor from the drop down list on the screen.

The motors have a unique serial number, shown on the label on the motor, and will appear on the screen in the Serial Number boxes. The example shown below is taken from a 1. Multiband antennas 2 motors per antenna , and single band antennas 1 motor per antenna will be similar.

It can be seen from the screen shots below that there are 3 configuration files for this antenna. It should be noted in the example below that the motors are ordered , , UMTS, however, the motors will not necessarily be in this sequence, but will be random, and different for each install. The motor controlling each set of ports must be filled in with the correct frequency band for that motor. Once all the data has been entered correctly, click on the Set Data button as indicated below.

Screen Shot, Step 12 Set Data This will bring up the following screen, click on the Write Data button as indicated below. Screen Shot, Step 13 Write Data Screen Shot, Step 15, Device Status screen after write data process completed For each of the frequency bands of a particular antenna, select Details button for each antenna in turn which will bring up the page as shown below.

Click on the Calibrate button to calibrate the motor. Screen Shot, Step 17, Motor calibrating Once the motor has calibrated correctly, then the Error Status box will change to OK as indicated below.

In the antenna Serial Number box, enter the Serial number of the antenna, and click on the Set button. When each motor has been correctly calibrated, there should be no errors, with the status boxes showing OK, as indicated below. To set the required tilt value, enter the required downtilt, and click the Set tilt button. Screen Shot, Step 21, Motor tilts set as required Once sector 1 has been configured, then move on to sector 2 and 3 in turn and configure using the same process Assuming a 3 sector site Once all 3 sectors are configured, check with the software that all motors can be seen, are configured correctly, and can be adjusted, each antenna frequency band is set to the tilt angle required by the SSF, and the motor serial numbers are correctly entered onto the site ASICC form The software configuration procedure is now complete.

This allows the antenna configuration for all antennas on a site to be stored in a. Screen Shot, Step 1: Report file function 2 Enter any comments relevant to the site or configuration of the antenna. For all installations it is an O2 requirement that the SCF Issue number and date is entered into the Comments section as a minimum. For optimisation the source of the work required i.

Part of a sample report file is shown below. Due to the use of an integrated VET motor, the antenna is pre-configured from the factory, and does not required the antenna type to be selected from the drop down box.

When configuring this antenna type, the following instructions must be followed. The software will initially show Scanning.. Screen shot, Step 1: Device Status scanning 2.

Once the antenna s has been found, the Status bar will show Scanning for RCU status as shown in the screen shot below Note, only 1 antenna is shown in this example. Once the scan has finished, the antenna details will be displayed as indicated in the screen shot below. As the antenna is already factory configured, then the antenna type will already be displayed, and the status should show OK Note: if Error is shown, see step 15 below.

It is important to check that the expected number of antennas are actually detected and shown. The serial numbers will correspond to those shown on the rear of the antenna. If the correct number of antennas are not shown, then check all connections before proceeding. The installer ID must be filled in with a 5 digit code indicating the rigging company and installation rigger The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date.

If this is not the case, the correct date should be entered. Screen Shot, Step 10, Set Data This will bring up the following screen, click on the Write Data button as indicated below to configure the antenna with the required information.

WebKathrein ESU app for programming the Kathrein ESU 5x single-cable outlets; Kathrein IP finder for displaying the alarm centre and the IP camera; Calculation tool for planning . WebApr 24,  · Use of Kathrein V Software with non Kathrein antennasGeneral Information Kathrein V Software may be used with Jaybeam, PCTel (Sigma) and . WebJan 26,  · Download popular programs, drivers and latest updates easily. Kathrein PCA is developed by Kathrein Werke KG. The most popular versions of this product . WebJan 14,  · Double click on the other device (KATHREIN PCA) to bring up the Properties window. From the displayed menu select Update Driver. The following window displays Missing: download. WebKATHREIN Solutions GmbH is one of the leading international suppliers of AutoID systems. Our product range includes high-performance RFID readers and RFID .
WebJan 14,  · Double click on the other device (KATHREIN PCA) to bring up the Properties window. From the displayed menu select Update Driver. The following window displays Missing: download. WebKathrein PCA is a Shareware software in the category Miscellaneous developed by Kathrein PCA. The latest version of Kathrein PCA is currently unknown. It was initially . WebJan 26,  · Download popular programs, drivers and latest updates easily. Kathrein PCA is developed by Kathrein Werke KG. The most popular versions of this product .

Home Updates Recent Searches kathrein pca 2. More Apple Software Update 2. Apple Software Update is a software tool by Apple that installs the latest version of Apple software. It was originally introduced to Mac users in Mac OS 9. A Windows version has been available since the introduction of iTunes 7. More UpdateStar Premium Edition UpdateStar 10 offers you a time-saving, one-stop information place for your software setup and makes your computer experience more secure and productive.

More VLC media player 3. More Free Download Manager 6. ORG – 7. Free Download Manager makes downloading files and videos easier and faster and helps avoid dreaded broken downloads. It is especially useful for those who are required to download files continually. More Internet Download Manager 6. Accelerate downloads by up to 5 times, schedule downloads, recover and resume broken downloads. The program features an adaptive download accelerator, dynamic file segmentation, high speed settings technology, and multipart downloading … more info Audio chipsets from Realtek are used in motherboards from many different manufacturers.

If you have such a motherboard, you can use the drivers provided by Realtek. More Software Informer 1. Software Informer is a utility that has been designed specifically for those users who care to keep their applications functional and ready for any task that might arise. More avast! Free Antivirus Free Antivirus is not only the best free antivirus product in the world, it may be the best antivirus product — free or paid.

VirusBulletin recently described it as Nothing short of a miracle. More Epson Software Updater 4. Descriptions containing kathrein pca 2. More WinRAR 6. WinRARs main features are very strong general and multimedia compression, solid compression, archive protection from damage, processing … more info More CCleaner 6. CCleaner is a freeware system optimization, privacy and cleaning tool.

CCleaner is the number-one tool for cleaning your Windows PC. Keep your privacy online and offline, and make your computer faster and more secure. More Microsoft OneDrive Store any file on your free OneDrive fromer SkyDrive and it’s automatically available from your phone and computers—no syncing or cables needed. More Intel Processor Graphics More Microsoft. NET Framework 6. The Microsoft. NET Framework runtime and associated files that are required to run most client applications.

NET Framework is Microsoft’s comprehensive and consistent … more info Additional titles containing kathrein pca 2. Latest News. How to open the Task Manager in Windows Windows December Patch Day. Firefox and Thunderbird Google Chrome Update Adobe Patch Day December delivers updates. Chrome saves memory and supports passkeys. The best Microsoft Office alternatives in The best free SSD tools in Microsoft PowerToys 0.

In addition to the hardware, we offer you such a software solution: the CrossTalk Software Suite. The software can be adapted to new challenges in almost any way and be used in a wide variety of industries. It reduces your costs and accelerates data processing processes. Please do not hesitate to talk to us, without obligation, about how our software suite could support you in your business. Whenever the need arises for automatic object identification and data acquisition or for the Internet of Things, the CrossTalk Software Suite is the powerful head of your system.

The CrossTalk Software Suite enables you, inter alia, to process and analyze data transmitted by mobile or wired radio-frequency identification systems RFID from automated production and real-time location systems RTLS in large warehouses. Overall, the modular software architecture supports the operation of several thousand devices of various technologies and various models in a distributed network environment.

Device drivers can be changed to another type or brand very quickly. This makes the CrossTalk Software Suite compatible with devices from various manufacturers. We are continuously developing CrossTalk Requirements are changing. Technological innovations open up new possibilities. We use them for optimized and extended functions of our CrossTalk software solution.

Through regular updates, CrossTalk is continuously developing, and we ensure that our platform is always one step ahead of the standard. That’s why, in , for example, we decided to introduce a new and even better CrossTalk user interface and to transfer the CrossTalk mobile technology “Mobile Application Framework” to Android.

Different license packages available – the right solution for everyone To use the CrossTalk AutoID and IoT software, you can choose from one of three license packages:. What can we do for you? Get in touch! Any questions about our Software products or do you need support in solving CrossTalk problems? If required, we also take care of planning, implementation and maintenance.

Everything from a single source. Everything designed by experts. Contact us. CrossTalk — applicable to numerous AutoID and IoT tasks The CrossTalk Software Suite supports you, for example, with efficient just-in-time production; It can process data on weak points in your machinery collected at an early stage and thus prevent expensive repairs; and It can contribute to the intelligent management of goods movement.

 
 

Kathrein pca 2.1 download.ret antenna installation using kathrein pca)

 
 

Antennas from different manufactures, and of different operating frequencies may be mixed on site, and daisy chained together onto a common VET control cable The maximum cable length to any antenna should not exceed m. If daisy chaining antennas together, installers must ensure that the total control cable length doesnt exceed m Note: There is not an actual firm cut off point for the length of the VET cable, and will depend on site specific conditions, however, installers should note that problems may be encountered if the run exceeds m Note: Argus antennas, being deployed by O2 from January for 6 sector working, dont have the facility to daisy chain antennas, as they have one AISG port only.

Tower type installation: The standard configuration would be one master control cable running from the termination box at the BTS equipment location and up the Issue 3.

The other antennas are then daisy chained as required. The unused AISG port of the last antenna must be sealed by a cap or other appropriate method. This is shown in Diagram 1 below. Roof type installation: For rooftops, it will often be more appropriate to use individual control cables for all antennas. In this situation, a single cable is run to each antenna AISG port, and the unused AISG connector sealed by a cap or other appropriate method, as shown in diagram 2 below.

In some situations, it will be appropriate to use a mixture of the above methods. When for example 2 antennas on a roof top are closely spaced, then these antennas can be daisy chained, and a third antenna which may be somewhat further away, will have a separate control cable.

Where the control cable is fixed directly to the feeder cable tray, then the use of tie wraps is allowed. Care must be taken when fixing the control cable directly to the feeder tray that any sharp edges which may cut into and damage the cable are avoided, or suitable protection applied. The cable should as a minimum be fixed every 1m, however, in some situations i.

In all situations, the control cable must be fixed so that no potential trip hazards are present, and to help avoid this, wherever possible, should be fixed to the inside of the tray, not the outside. The box must be deployed in the nearest location possible to the BTS equipment, and within 3m of a suitable v Power supply. When configuring the VET Motors after antenna installation, the motor serial numbers and locations will be required All Kathrein antennas are delivered as manual VET versions, and the motor must be obtained separately at the time of order.

The detailed installation instructions provided with the antennas and motors must be followed. With the exception of the antenna with integrated motor See page 20 for further information, all Kathrein antennas will require the VET motor to be configured with the correct antenna data information.

To ensure installers have the correct antenna information, the latest Device Data software file must be used. As of Jan , this is version 2. Kathrein VET motors are supplied with a termination connector which must be fitted to any unused ports Jaybeam and Powerwave antennas have the VET motors factory installed and configured, and should not be removed prior to installation. Argus antennas have preconfigured, integrated VET motors which cannot be removed. Note: The screen shots 2 to 21 below show an earlier version of the Kathrein software, however, the procedure is the same as when using V2.

The MHA configuration section shows the correct V2. When configuring the antennas the following step by step instructions must be followed. Note: The following notes show a single Kathrein triband antenna configuration process, however, all Kathrein antennas, and other non Kathrein antennas are all generally configured in the same way. Where different procedures are required, these are given in the Section Use of Kathrein V2.

Connect up all VET motors using appropriate daisy chaining where more than one motor per antenna is required and the main antenna to VET termination box cable, using a short VET control cable to connect the PCA controller to the termination box. Screen Shot : Step 2. New motors, Software scanning 3 VET motors for information 3.

It is important to check that the expected number of motors are actually detected and shown. If the correct number of motors are not shown, then the missing motors should be checked for correct connection. It should also be noted that the serial number will not be shown in any predefined order, but will be random, even if they have been installed in sequence.

Once the Software has read the information from the VET motors, the Status boxes will show ERROR as shown below, as no antenna configuration information will have yet been entered into the motors. With the exception of the UMTS only antenna, type number See page 20 for configuration details of this antenna , the Antenna Type boxes will also be empty, as no antenna type will have yet been entered.

The motor serial numbers shown on the screen will correspond to the VET motors connected to the relevant antenna ports as shown on the label on the motor. Screen Shot : Step 4. Which will take you to a screen as shown below. Where n is the sector number the antenna is connected to. The Basestation ID must be filled in with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed.

The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date. If this is not the case, the correct date should be entered The antenna type must be filled in with the correct frequency information for that motor from the drop down list on the screen.

Any questions about our Software products or do you need support in solving CrossTalk problems? If required, we also take care of planning, implementation and maintenance. Everything from a single source. Everything designed by experts.

It should also be noted that use of the old Sigma VET control software is not longer approved for use on any O2 antenna system.

This Datasheet V3. VET installation work may only be performed by suitably trained personnel. All rigging engineers must have access to the correct software tools and fully understand all commissioning and set up procedures prior to working on any AISG controlled antenna or MHA system When installing VET antennas, the following items will be required, in addition to the normal antenna installation tools Kathrein Handheld PCA box, part number , as shown below.

Note: It is important that the software versions given are used, as antennas currently being deployed by O2 will not be able to be controlled by earlier versions of software.

A short VET control cable to connect the termination box to the controller. The guidelines given here are to assist Radio Planners and build contractors as to when it is appropriate to deploy antenna which can be remotely tilted In general, an antenna must be deployed as remote tilt unless the antenna may be manually optimised using the following guidelines:1 No outage is required for any antenna on site 2 The antenna is accessible by a person who is not a qualified rigger 3 The antenna can be accessed with no access fees payable i.

In this situation, remote VET antennas should be deployed, even if they follow the above guidelines, as long as the VET box can be accessed without incurring charges. In general, this will only apply to rooftop sites where the antenna may be easily accessed by a non rigger person. A VET antenna installation will be any combination of single band, Multiband or Triband antennas on any given site.

Each antenna may either use a separate control cable, or 2 or more antennas may be Daisy chained together, using control cables looped from one antenna to the next, with one main cable back to the BTS equipment. Antennas from different manufactures, and of different operating frequencies may be mixed on site, and daisy chained together onto a common VET control cable The maximum cable length to any antenna should not exceed m.

If daisy chaining antennas together, installers must ensure that the total control cable length doesnt exceed m Note: There is not an actual firm cut off point for the length of the VET cable, and will depend on site specific conditions, however, installers should note that problems may be encountered if the run exceeds m Note: Argus antennas, being deployed by O2 from January for 6 sector working, dont have the facility to daisy chain antennas, as they have one AISG port only.

Tower type installation: The standard configuration would be one master control cable running from the termination box at the BTS equipment location and up the Issue 3. The other antennas are then daisy chained as required. The unused AISG port of the last antenna must be sealed by a cap or other appropriate method. This is shown in Diagram 1 below. Roof type installation: For rooftops, it will often be more appropriate to use individual control cables for all antennas. In this situation, a single cable is run to each antenna AISG port, and the unused AISG connector sealed by a cap or other appropriate method, as shown in diagram 2 below.

In some situations, it will be appropriate to use a mixture of the above methods. When for example 2 antennas on a roof top are closely spaced, then these antennas can be daisy chained, and a third antenna which may be somewhat further away, will have a separate control cable. Where the control cable is fixed directly to the feeder cable tray, then the use of tie wraps is allowed. Care must be taken when fixing the control cable directly to the feeder tray that any sharp edges which may cut into and damage the cable are avoided, or suitable protection applied.

The cable should as a minimum be fixed every 1m, however, in some situations i. In all situations, the control cable must be fixed so that no potential trip hazards are present, and to help avoid this, wherever possible, should be fixed to the inside of the tray, not the outside. The box must be deployed in the nearest location possible to the BTS equipment, and within 3m of a suitable v Power supply.

When configuring the VET Motors after antenna installation, the motor serial numbers and locations will be required All Kathrein antennas are delivered as manual VET versions, and the motor must be obtained separately at the time of order.

The detailed installation instructions provided with the antennas and motors must be followed. With the exception of the antenna with integrated motor See page 20 for further information, all Kathrein antennas will require the VET motor to be configured with the correct antenna data information. To ensure installers have the correct antenna information, the latest Device Data software file must be used. As of Jan , this is version 2. Kathrein VET motors are supplied with a termination connector which must be fitted to any unused ports Jaybeam and Powerwave antennas have the VET motors factory installed and configured, and should not be removed prior to installation.

Argus antennas have preconfigured, integrated VET motors which cannot be removed. Note: The screen shots 2 to 21 below show an earlier version of the Kathrein software, however, the procedure is the same as when using V2.

The MHA configuration section shows the correct V2. More UpdateStar Premium Edition UpdateStar 10 offers you a time-saving, one-stop information place for your software setup and makes your computer experience more secure and productive.

More VLC media player 3. More Free Download Manager 6. ORG – 7. Free Download Manager makes downloading files and videos easier and faster and helps avoid dreaded broken downloads.

It is especially useful for those who are required to download files continually. More Internet Download Manager 6. Accelerate downloads by up to 5 times, schedule downloads, recover and resume broken downloads. The program features an adaptive download accelerator, dynamic file segmentation, high speed settings technology, and multipart downloading … more info To category Catalogues.

Kataloge und Prospekte. Unsere Druckschriften bieten Ihnen einen umfassenden Einblick in unser breites Produktspektrum. To category Newsroom. To category Support. To category Sales.

WebKATHREIN Solutions GmbH is one of the leading international suppliers of AutoID systems. Our product range includes high-performance RFID readers and RFID . Web» kathrein pca software download» kathrein pca software download» kathrein pca software download » kathrein pca ret software download» kathrein pca . WebApr 24,  · Use of Kathrein V Software with non Kathrein antennasGeneral Information Kathrein V Software may be used with Jaybeam, PCTel (Sigma) and . WebKathrein ESU app for programming the Kathrein ESU 5x single-cable outlets; Kathrein IP finder for displaying the alarm centre and the IP camera; Calculation tool for planning . WebKathrein PCA is a Shareware software in the category Miscellaneous developed by Kathrein PCA. The latest version of Kathrein PCA is currently unknown. It was initially .

Where different procedures are required, these are given in the Section Use of Kathrein V2. Connect up all VET motors using appropriate daisy chaining where more than one motor per antenna is required and the main antenna to VET termination box cable, using a short VET control cable to connect the PCA controller to the termination box. Screen Shot : Step 2. New motors, Software scanning 3 VET motors for information 3.

It is important to check that the expected number of motors are actually detected and shown. If the correct number of motors are not shown, then the missing motors should be checked for correct connection. It should also be noted that the serial number will not be shown in any predefined order, but will be random, even if they have been installed in sequence.

Once the Software has read the information from the VET motors, the Status boxes will show ERROR as shown below, as no antenna configuration information will have yet been entered into the motors. With the exception of the UMTS only antenna, type number See page 20 for configuration details of this antenna , the Antenna Type boxes will also be empty, as no antenna type will have yet been entered.

The motor serial numbers shown on the screen will correspond to the VET motors connected to the relevant antenna ports as shown on the label on the motor.

Screen Shot : Step 4. Which will take you to a screen as shown below. Where n is the sector number the antenna is connected to. The Basestation ID must be filled in with the O2 6 digit site CSR number The installer ID must be filled in with a code which identifies the installation rigger and rigging company Maximum of five digits allowed.

The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date. If this is not the case, the correct date should be entered The antenna type must be filled in with the correct frequency information for that motor from the drop down list on the screen. The motors have a unique serial number, shown on the label on the motor, and will appear on the screen in the Serial Number boxes.

The example shown below is taken from a 1. Multiband antennas 2 motors per antenna , and single band antennas 1 motor per antenna will be similar. It can be seen from the screen shots below that there are 3 configuration files for this antenna. It should be noted in the example below that the motors are ordered , , UMTS, however, the motors will not necessarily be in this sequence, but will be random, and different for each install.

The motor controlling each set of ports must be filled in with the correct frequency band for that motor. Once all the data has been entered correctly, click on the Set Data button as indicated below. Screen Shot, Step 12 Set Data This will bring up the following screen, click on the Write Data button as indicated below.

Screen Shot, Step 13 Write Data Screen Shot, Step 15, Device Status screen after write data process completed For each of the frequency bands of a particular antenna, select Details button for each antenna in turn which will bring up the page as shown below.

Click on the Calibrate button to calibrate the motor. Screen Shot, Step 17, Motor calibrating Once the motor has calibrated correctly, then the Error Status box will change to OK as indicated below. In the antenna Serial Number box, enter the Serial number of the antenna, and click on the Set button. When each motor has been correctly calibrated, there should be no errors, with the status boxes showing OK, as indicated below.

To set the required tilt value, enter the required downtilt, and click the Set tilt button. Screen Shot, Step 21, Motor tilts set as required Once sector 1 has been configured, then move on to sector 2 and 3 in turn and configure using the same process Assuming a 3 sector site Once all 3 sectors are configured, check with the software that all motors can be seen, are configured correctly, and can be adjusted, each antenna frequency band is set to the tilt angle required by the SSF, and the motor serial numbers are correctly entered onto the site ASICC form The software configuration procedure is now complete.

This allows the antenna configuration for all antennas on a site to be stored in a. Screen Shot, Step 1: Report file function 2 Enter any comments relevant to the site or configuration of the antenna.

For all installations it is an O2 requirement that the SCF Issue number and date is entered into the Comments section as a minimum. For optimisation the source of the work required i. Part of a sample report file is shown below. Due to the use of an integrated VET motor, the antenna is pre-configured from the factory, and does not required the antenna type to be selected from the drop down box.

When configuring this antenna type, the following instructions must be followed. The software will initially show Scanning.. Screen shot, Step 1: Device Status scanning 2.

Once the antenna s has been found, the Status bar will show Scanning for RCU status as shown in the screen shot below Note, only 1 antenna is shown in this example. Once the scan has finished, the antenna details will be displayed as indicated in the screen shot below. As the antenna is already factory configured, then the antenna type will already be displayed, and the status should show OK Note: if Error is shown, see step 15 below.

It is important to check that the expected number of antennas are actually detected and shown. The serial numbers will correspond to those shown on the rear of the antenna. If the correct number of antennas are not shown, then check all connections before proceeding. The installer ID must be filled in with a 5 digit code indicating the rigging company and installation rigger The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date.

If this is not the case, the correct date should be entered. Screen Shot, Step 10, Set Data This will bring up the following screen, click on the Write Data button as indicated below to configure the antenna with the required information. Once this is done, click on the Finish button, the screen will then show all antennas as OK as shown below.

Click on the Details button, and the screen will show the status of the antenna s as shown below. Screen Shot, Step 14, Details screen If Error is shown in the error status box, then the antenna will need to be calibrated. Once all motors have been correctly calibrated, then return to the Device Status screen by clicking on the Back button Bottom LHS of screen. There should now be no errors showing, with the Error Status windows showing OK.

Screen Shot, Step 17, Setting Motor tilt Once tilt is set, the screen will show OK as indicated below. Once the antenna is configured and all tilting set, Save a report file as per procedure given on Page 17 The software configuration procedure is now complete Use of Kathrein V2. Note: The V2. In general, the instructions given above for use with Kathrein antennas is also relevant for use with other manufacturers antennas. The following notes give indications of differences that will be encountered and solutions.

When the software is opened, and the initial Device Scan starts, an error message No Devices! Englisch EN. To category about us. To category Products. To category Catalogues. Kataloge und Prospekte. Unsere Druckschriften bieten Ihnen einen umfassenden Einblick in unser breites Produktspektrum.

To category Newsroom. To category Support. To category Sales. To category Back to German Website. Screen Shot, Step 21, Motor tilts set as required Once sector 1 has been configured, then move on to sector 2 and 3 in turn and configure using the same process Assuming a 3 sector site Once all 3 sectors are configured, check with the software that all motors can be seen, are configured correctly, and can be adjusted, each antenna frequency band is set to the tilt angle required by the SSF, and the motor serial numbers are correctly entered onto the site ASICC form The software configuration procedure is now complete.

This allows the antenna configuration for all antennas on a site to be stored in a. Screen Shot, Step 1: Report file function 2 Enter any comments relevant to the site or configuration of the antenna. For all installations it is an O2 requirement that the SCF Issue number and date is entered into the Comments section as a minimum. For optimisation the source of the work required i. Part of a sample report file is shown below. Due to the use of an integrated VET motor, the antenna is pre-configured from the factory, and does not required the antenna type to be selected from the drop down box.

When configuring this antenna type, the following instructions must be followed. The software will initially show Scanning.. Screen shot, Step 1: Device Status scanning 2. Once the antenna s has been found, the Status bar will show Scanning for RCU status as shown in the screen shot below Note, only 1 antenna is shown in this example. Once the scan has finished, the antenna details will be displayed as indicated in the screen shot below.

As the antenna is already factory configured, then the antenna type will already be displayed, and the status should show OK Note: if Error is shown, see step 15 below. It is important to check that the expected number of antennas are actually detected and shown. The serial numbers will correspond to those shown on the rear of the antenna.

If the correct number of antennas are not shown, then check all connections before proceeding. The installer ID must be filled in with a 5 digit code indicating the rigging company and installation rigger The Inst Date will be filled in automatically with the date of the antenna install assuming the PC is set to the correct date.

If this is not the case, the correct date should be entered. Screen Shot, Step 10, Set Data This will bring up the following screen, click on the Write Data button as indicated below to configure the antenna with the required information. Once this is done, click on the Finish button, the screen will then show all antennas as OK as shown below. Click on the Details button, and the screen will show the status of the antenna s as shown below.

Screen Shot, Step 14, Details screen If Error is shown in the error status box, then the antenna will need to be calibrated. Once all motors have been correctly calibrated, then return to the Device Status screen by clicking on the Back button Bottom LHS of screen. There should now be no errors showing, with the Error Status windows showing OK.

Screen Shot, Step 17, Setting Motor tilt Once tilt is set, the screen will show OK as indicated below. Once the antenna is configured and all tilting set, Save a report file as per procedure given on Page 17 The software configuration procedure is now complete Use of Kathrein V2. Note: The V2. In general, the instructions given above for use with Kathrein antennas is also relevant for use with other manufacturers antennas.

The following notes give indications of differences that will be encountered and solutions. When the software is opened, and the initial Device Scan starts, an error message No Devices! Screen Shot. No Devices found Solution. Click on OK, and click the Devices Status tab, which will re-start the device scan, and find all connected motors. Note:, if No Devices!

These antennas were supplied until approx end If the Kathrein V2. It is important that this cable is only used with Sigma V1. If Sigma V1. The Crossover cable should then be added at the output of the PCA, and the software re-started, at which time the V1. Note: Only early Sigma antennas Up to approximately end were deployed as V1. No other manufactures antennas were deployed with V1. If any of these antennas are removed from site i. The Software should be closed down and re-opened, and allow the motors to be rescanned.

Once this has been completed, the Error Status box should show OK , and should show the correct tilt setting. If the correct tilt setting is slightly off i. The normal configuration should then be continued, and the antenna set to its final required tilt setting. Powerwave antennas which do not have the configuration file loaded into the VET motors Solution. There is no direct solution to this problem, as the Kathrein software is not capable of loading the configuration files into the Powerwave antennas VET motors.

All Powerwave antennas which are required to be remote tilt versions should be purchased with the motor already fitted in the factory. This will ensure that the configuration file will have already been pre-loaded in the factory, and the antenna can then be configured as normal. If a new clean motor which has not be configured is used, i. Additionally, if using the earlier PCA, then the current draw option is not available.

When configuring the MHAs the following step by step instructions must be followed.

– Solo el escroto. Беккер даже прервал свое занятие и посмотрел на лейтенанта. Solo el escroto. Он с трудом сдержал улыбку. – Только лишь мошонка.

Клушару эта идея понравилась. Он сел в кровати. – Нуда, конечно… С удовольствием. Беккер достал блокнот. – Итак, начнем с утра.